Hi there Frank, and yes we sure do have trailer hitch covers with a United States Army display. Each is for a 2" hitch and there are a few different styles to choose from:
- All Black: US Army Trailer Hitch Cover # AUT-ARMY2-RB
- Brushed/Silver: US Army Trailer Hitch Cover # AUT-ARMY2-S
- Black Base & Color Emblem: Army Of One Seal Trailer Hitch Cover # AMG102391 view full answer...
Hey Kendall, yes when the Draw Tite hitch part # 76184 is installed on your 2022 Buick Enclave you will be able to reinstall the bumper cover that you mentioned. view full answer...
Good morning, John. I will admit, I did have to do a quick google search on the US Merchant Marines to see exactly what it is. Very cool stuff. I am sorry to say that we do not offer a hitch cover with the US Merchant Marine Emblem. Even looking around elsewhere online I could not find any such hitch cover available anywhere. Everything out there is either Marine Corps or Coast Guard.
The only thing I can think of would be to get a blank hitch cover like part # AUT-BNK3-RB. It looks like... view full answer...
In order to use a standard light up hitch cover that doesn't have anything special, like the skull eyes, you'll need to use the Brophy Adapter # HTAD. This then allows you to use a light up cover.
I also recommend ordering locks for both to help deter prying hands from using your light setup on someone else's vehicle. We have the hitch locks # e98880 and # e98879 which fit 2" and 1-1/4" receivers respectively and can be ordered keyed alike if you choose so.
Attached are some review videos... view full answer...
A LED Brake Light Hitch Cover will fit into the etrailer Trailer Hitch Receiver # e93ZR you installed on your 2021 Nissan Rogue. The light needs to plug into a 4-way flat connector so you will also need the Curt T-Connector Vehicle Wiring Harness # C44ER to install on your Nissan Rogue. Hitch covers with a light like this will all use this style connector since the vehicle is most likely going to have trailer wiring with a trailer hitch receiver installed. view full answer...
The reason for the error is the LED in the hitch cover. This has a very low power draw which causes errors in vehicles like your 2022 Ford Edge ST. The only way to fix it is to wire in an aftermarket 4-way like the # HM48030 to bypass the system or add load resistors like # DI34ZR to your stop/turn wires on your 4-way. view full answer...
You will want to verify your specific tonneau cover as there are several different manufacturers and some are mounted inside the bed rails while others mount their tonneau on top of the bed rails. The B&W Companion # BWRVK3500 you are looking at has a hitch height of 16-1/4" to 18-1/4". This is typically lower than most tonneau covers but you want to verify on your 2021 GMC Sierra 3500 which I see has a 22.4" bed height. view full answer...
On the Ram hitch cover part # PC002237 the distance from the base of the cover to the center of the first hole is 1-7/16 of an inch, the next 2-1/8 inch, and for the rear one 2-7/8 inch. view full answer...
Yes, the Curt Trailer Hitch Receiver # C96NR installs behind the rear bumper and hitch cover on your 2022 Jeep Grand Cherokee L. When the hitch bumper cover is in place the hitch will be completely hidden. You will have to remove the panel to use the hitch.
If you plan on doing some towing you will also need wiring. I recommend the Tekonsha T-One Vehicle Wiring Harness # TK39VR. This will plug into existing wiring so no cutting or splicing is required. Once installed you will have a 4-way... view full answer...
Hey Jesse, yes a standard fifth wheel hitch like the Curt part # C22ER which is a 30k fifth wheel hitch. This will work really great with your RV and since the handle does not stick up it would fit under your tonneau as well. view full answer...
I recommend going with an Adco Olefin HD RV Cover, like part # AD49ZR for a 34' toy hauler, because so far we have received great reviews from our customers, plus they come with a 3-year warranty. Most of the feedback that we hear is in our customer reviews so I also recommend checking those out on the product page.
If you let me know what the length of your toy hauler is (see attached photo) I can let you know which of the linked covers would work best for you. view full answer...
Hi Kek!
Yes, the mounting brackets of the Draw-Tite Max-Frame Trailer Hitch Receiver # 76138 will fit over the frame holes you highlighted from our install video when you install this on your 2018 Mazda CX-5.
There are other holes in the frame rail that any water accumulation will be able to drain out from if need be. Ideally you shouldn't be getting much water inside the frame rail unless you are driving through some higher water like crossing a small creek. view full answer...
Absolutely. If you add the # KD567H to your Jeep you will also be compelled to buy monogrammed seat covers, a matching keychain, and fill the cab with rubber ducks. Don't forget a lift kit to handle those speed bumps. Everyone knows a true Jeep is not just a vehicle, it is an accessory to your lifestyle.
I have added a quick sketch I made below so you know what to expect. view full answer...
I confirmed with EcoHitch and their Trailer Hitch Receiver # EH39FR was just confirmed to fit your 2024 Tesla Model Y this week. This is great since the receiver opening is accessible through the rear cover plate just like a factory option. view full answer...
I checked the installation videos for the various 1-1/4-inch and 2-inch hitch sizes offered for your 2017 Ford Edge, including hitch parts # 75234, # C13234 and # 75214. Most install so that there is about 5-inches of space from the hitch pin hole to the rear edge of the bumper cover. The Swagman G10 2-Bike Platform Rack # S64682 also has 5-inches of clearance when it is empty and folded up so this rack may touch the bumper cover.
For a similar Swagman frame-mount carrier that gives more... view full answer...
With your 2020 Chevrolet Silverado 1500 having a diesel engine you will need the Draw-Tite Front Mount Trailer Hitch Receiver # DT44HR. I do recommend using the Draw-Tite QSP Trailer Hitch Silencer and Cover # 63080 to help reduce the chances of having the whistle often associated with a front receiver. view full answer...
Hey Barry, we can confirm that both the Draw Tite part # 24920 and the Curt # C11406 are a confirmed fit for your 2020 Honda Fit Sport. I also would prefer the Curt so that would be what I would go with. Back in the day the used to require a stabilizer strap when carrying non-supported loads like bike racks but they got rid of that requirement so you do not need to worry about that.
Neither hitch comes with a hitch cover but we do have the Curt # C22271 that would fit the hitch and work... view full answer...
It does not. The Hidden Hitch by Draw-Tite item # DT36GR is just the trailer hitch. To add wiring to your 2012 BMW X5 you will need the ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit item # 119250KIT.
To round out your towing setup, I recommend the Curt Towing Starter Kit for 2" Hitches item # C45534. This towing kit will provide you with a 2" ball and a fixed ball mount with a 3/4" rise and 2" drop. It also includes a hitch pin and clip,... view full answer...
Yes, you can if you go with the Draw-Tite item # 76260 over the Stealth Hitches item # SH66GR. There's no way to purchase item # SH66GR for your 2019 Land Rover Velar without the accessory receiver.
Both hitches conceal behind your rear bumper cover so visually you won't be giving anything up. view full answer...
The best hitch for your 2024 Jeep Grand Cherokee is the Draw-Tite item # DT42GR. This hitch is custom fit and bolts to your Jeep with included hardware. It is a class IV hitch with a 2", that has a 7,500 lbs towing capacity, and a 1,125 lbs maximum tongue weight.
The reason the Draw-Tite item # DT42GR is the best hitch for your Jeep is that it installs behind your rear bumper cover. It can be completely concealed.
If you are planning on towing you will also need a wiring harness item... view full answer...
Go To Results